Power Supply no wire buying scrap price

Power Supplies Without Output Wires

This category applies to power supplies where the original factory output wire assembly has already been removed.

Although the output cables are no longer attached, the remaining metal housing and internal electronic components still form a recognizable power supply suitable for purchasing evaluation.

Customers do not need to reinstall the original output wires before bringing the equipment to Ohata.

What Parts Usually Remain

After the output wires have been removed, the remaining power supply may still contain components such as:

• Transformer

• Heat sinks

• Capacitors

• Inductors

• Cooling fan

• Printed circuit board

• EMI filter assemblies

Keeping these components together helps inspectors identify the remaining power supply assembly during purchasing evaluation.

Why Are the Output Wires Removed?

During electronics recycling, the original output wire assembly is often removed because the copper wiring and the remaining power supply are recovered as different material streams.

Removing the factory wiring does not automatically make the power supply unacceptable. This purchasing category is specifically intended for units after the original output cables have been removed.

Internal Electrical Assemblies Remain Part of the Unit

The remaining unit may still contain components such as:

• Transformers

• Heat sinks

• Capacitors

• Inductors

• Cooling fan

• Printed circuit board

• EMI filter assemblies

These internal assemblies continue to form the identifiable power conversion unit.

Loose Cable Bundles Should Be Managed Separately

Recovered wire bundles, extension cords, removed output harnesses, and unrelated electrical cables should preferably be presented separately from wire-removed power supplies.

Separating different material streams helps simplify purchasing identification.

Different Equipment Sources May Produce Similar Units

Power supplies without output wiring may originate from many types of equipment, including:

• Desktop computers

• Servers

• Industrial control systems

• Communication equipment

• Workstations

• Network devices

The original equipment source does not determine the purchasing category.

Assembly Identification Takes Priority Over Previous Function

During inspection, attention is directed toward the remaining physical assembly rather than whether the original power supply was operational before dismantling.

The purchasing category is based primarily on the identifiable structure of the recovered unit.

How Ohata Identifies This Category

During inspection, Ohata may review:

• Remaining enclosure

• Internal power conversion assembly

• Evidence of output wire removal

• Overall structural integrity

• Degree of dismantling

• Mixed electronic materials

The purchasing category is confirmed according to the actual recovered assembly presented during inspection.

Ready to Sell Power Supplies Without Wires in Richmond?

Once you believe your processors match the item's characteristics, you don’t need to confirm the final grade yourself. The next step is simply to check the current buying information, keep the processors intact and prepare them for inspection.

STEP 1 – Check Today’s Buying Prices and Sort Your Materials

Before visiting our Richmond yard, please review the latest Canadian e-scrap buying prices and identification guides in the Ohata Scrap Wiki.

You can also use Ohata.AI Vision 1.0 Beta 1.0 to investigate an unfamiliar circuit board. Upload a clear photograph, and the tool can analyze visible features, such as the board’s shape, CPU socket, integrated circuits, connectors and component layout, to suggest what type of board it may be.

Buying prices and conditions may change with the market, so checking the applicable item page before you leave can help you understand how your material should be prepared.

Whenever practical, separate your e-scrap into groups such as:

• Computer motherboards

• Hard drives and HDD controller boards

• Server boards

• Laptop motherboards and logic boards

• Telecommunications boards

• CPUs and memory modules

• Power supplies and cables

• Other or uncertain electronic scrap

You don’t need to assign every item a final grade yourself. If something is unfamiliar, keep it in an “uncertain” group and use Ohata.AI for a preliminary photo-based identification.

Walk-ins are welcome during regular business hours, and no appointment is required for most ordinary drop-offs.

If you have a large commercial load, palletized shipment or an unusual type of material, please contact the Richmond team before visiting so we can prepare for your arrival.

STEP 2 – Bring Your E-Scrap and Valid Government-Issued Photo ID

Please bring your electronic scrap together with a valid government-issued photo ID.

Examples may include:

• British Columbia Driver’s Licence

• BC Identification Card

• BC Services Card with photo

• Canadian passport

• Permanent Resident Card

• Other valid government-issued photo identification

Business sellers may also be asked to provide company information or supporting documentation when applicable.

Clearly separated and labelled material is usually quicker to inspect. If possible, prepare the approximate weight and quantity for each group before visiting.

Please also remember that computers, servers, hard drives and solid-state drives may contain personal or business information. Back up anything you need and follow your own data-security requirements before the equipment leaves your control.

STEP 3 – Visit Our Richmond E-Scrap Buying Yard

Our Richmond yard is located at 11220 Voyageur Way, Unit 7, Richmond, BC, V6X 3E1. Before leaving, you can check the route and current traffic information through Google Maps.

1. Look for the Ohata sign

When you arrive at the property, first look for the Ohata Resource Canada Inc. sign on the building. Once you find it, continue around to the rear of the building, where our warehouse entrance is located.

When you see this sign, continue around to the rear of the building.

2. Continue to the Rear Warehouse Entrance

Drive carefully around the building and look for the vertical Ohata sign beside the rear entrance. This vertical sign is the easiest landmark for finding our receiving warehouse.

Follow the route around the building to reach the warehouse.

The vertical Ohata sign identifies the correct warehouse entrance.

3. Park Directly in Front of the Warehouse

If you arrive by car, you may park directly in front of the Ohata warehouse entrance while your e-scrap is being received.

Once you reach the warehouse, please park and wait there. A member of our team will come to assist you with your material.

If you have difficulty finding the rear entrance, please call or message us:

Telephone and WhatsApp: +1 (236) 888-1086

For large commercial loads or palletized shipments, please contact the Richmond team before visiting so we can prepare for unloading.

When you arrive:

• Bring smaller quantities to the receiving area.

• Ask a staff member for assistance with heavy or larger loads.

• Our team will inspect, sort and weigh the material.

• The applicable buying category and condition will be confirmed.

• The final buying price will be determined after physical inspection.

• Payment will be processed according to the current purchasing policy.

Walk-in customers are welcome during regular business hours. Most visits don’t require an appointment, but advance contact is recommended for commercial, palletized or unusually large loads.

You can review directions, parking and visitor information on the Richmond yard access page.

Helpful Tips Before Your Richmond Visit

• Check the current Canadian buying prices before travelling.

• Use Ohata.AI when you need help identifying an unfamiliar item.

• Take clear front-and-back photographs before requesting an initial review.

• Separate different board and equipment categories whenever practical.

• Keep damaged, wet, burned, corroded or contaminated items separate.

• Remove unrelated garbage and unnecessary packaging.

• Don’t cut boards or remove major components unless you understand how the separated materials will be evaluated.

• Back up and erase data-bearing devices according to your requirements.

• Bring valid government-issued photo identification.

• Contact Ohata Resource Canada Inc. before bringing a large commercial or palletized load.

Published online prices are references and may change. Final acceptance, classification, measured weight and buying price are determined after physical inspection.