ohata.ai
Ohata Resource Canada Inc.

Hitachi Non-SATA HDD Board 2.5 inch 2003 Buying scrap price

Back to Hard Disk Drive(HDD) Non-SATA Board price list
hdd-non-sata-board-hitachi-2003
hdd-non-sata-board-hitachi-2003
hdd-non-sata-board-hitachi-2003
hdd-non-sata-board-hitachi-2003
Updated: Aug 04,2026

19.00 CAD / lb

The Price is buying by Yard of Richmond, BC, Canada.

Key Buying Introduction

1. We purchase genuine Hitachi 2.5-inch IDE (PATA) HDD controller boards removed from legacy Travelstar hard disk drives, with a 1 lb minimum purchasing quantity.

2. Original HDD PCBs containing the factory controller IC, motor driver IC, ROM chip (where applicable), IDE connector, and other major electronic components generally qualify for higher purchasing values.

3. Every HDD logic board is individually inspected based on its condition, PCB completeness, recoverable electronic materials, manufacturer, and current electronic scrap market conditions.

4. Ohata Resource Canada Inc. welcomes walk-in customers throughout Metro Vancouver, the Lower Mainland, and British Columbia. No appointment is required during regular business hours.

Buying Details of Conditions

Hitachi Non-SATA HDD Board 2.5 inch 2003's classification is HDD Non-SATA Board.

Learn more about HDD Non-SATA Boards


Hitachi Non-SATA HDD Board 2.5 inch 2003 Purchase Guidelines

1. Genuine Hitachi HDD PCB Requirement

We purchase original Hitachi 2.5-inch IDE (PATA) HDD PCBs removed from legacy Travelstar laptop hard drives manufactured during the early 2000s. Genuine factory controller boards are preferred. Counterfeit, aftermarket replacement, or modified PCBs may not qualify for purchase.

2. Minimum Selling Quantity

Our minimum purchasing quantity is 1 lb. We welcome individuals, IT departments, repair shops, computer recyclers, electronics dismantlers, and IT asset disposition (ITAD) companies. Larger quantities may qualify for volume-based purchasing rates.

3. Accepted Board Types

We accept original Hitachi IDE (PATA) laptop HDD controller boards, including many legacy Travelstar series hard drives. Boards should retain their original electronic components whenever possible.

Typical characteristics include:

  • 2.5-inch laptop HDD PCB

  • IDE (PATA) interface

  • 44-pin connector

  • Marvell controller IC

  • Texas Instruments motor driver IC

  • Early-2000s Travelstar generation

4. SATA vs. Non-SATA HDD Controller Boards

Hitachi Non-SATA HDD boards use the IDE (PATA) interface, which was widely used before SATA technology became the industry standard. Non-SATA boards feature a parallel data interface and are commonly found in legacy desktop and laptop hard disk drives manufactured during the late 1990s and early 2000s. In contrast, SATA controller boards use a smaller serial interface introduced in the mid-2000s and are found in newer hard drives. Because the connectors, communication protocols, and PCB designs are different, SATA and Non-SATA boards are classified separately and are not interchangeable.

If you are unsure which type you have, compare the connector before bringing your boards for recycling.

SATA board and non-SATA board comparison
SATA board and non-SATA board comparison chart
SATA board and non-SATA board comparison chart

Related Pages:

5. Complete Board Condition

Boards containing the original controller IC, ROM chip (where applicable), motor driver IC, IDE connector, crystal oscillator, and other major electronic components generally receive the highest buying prices. Complete boards are preferred over stripped or modified PCBs.

6. Damaged or Incomplete Boards

Boards with broken PCBs, severe corrosion, fire damage, drilled holes, missing integrated circuits, removed connectors, excessive contamination, or extensive component harvesting may receive reduced buying prices or may not qualify for purchase following inspection.

Damaged or Incomplete Boards
Damaged or incomplete boards may receive a reduced price or may not be accepted.

7. Mixed Board Lots

Mixed shipments containing Hitachi IDE controller boards, SATA HDD boards, or other electronic circuit boards are accepted. However, mixed lower-grade materials or unrelated electronic scrap may result in a lower overall purchasing price due to additional sorting and grading requirements.

Mixed with other boards may result in a lower purchasing price.
Mixed with other boards may result in a lower purchasing price.

8. Final Inspection and Pricing

Every Hitachi HDD controller board is individually inspected by experienced staff at Ohata Resource Canada Inc. During evaluation, we examine the PCB condition, interface type, controller IC, motor driver IC, connector condition, completeness of components, recoverable materials, and overall board quality. Final purchasing values are determined using our internal inspection procedures together with current electronic scrap market conditions.

9. Walk-In and Local Service

Walk-in customers are welcome during regular business hours without an appointment. We proudly serve Vancouver, Burnaby, Richmond, Surrey, Coquitlam, Delta, Langley, New Westminster, North Vancouver, West Vancouver, the Lower Mainland, Fraser Valley, and communities throughout British Columbia.

10. Buying Policy

Buying conditions, accepted board types, and purchasing prices may change at any time without prior notice. The latest purchasing information published by Ohata Resource Canada Inc. and Ohata.ai supersedes previous versions. Our buying standards are reviewed periodically to reflect changes in electronic scrap markets, legacy HDD technology, and internal classification guidelines.

FAQ
1. What is today’s price for Hitachi Non-SATA HDD Board 2.5 inch 2003 Buying?
As of Aug 04,2026, Ohata Resource Canada Inc., (Richmond, BC, Canada) is purchasing Hitachi Non-SATA HDD Board 2.5 inch 2003 Buying at 19.00 (CAD/lb). We provide competitive scrap prices in Delta, Surrey, Richmond, and across the Greater Vancouver area.
2. What types of Hitachi HDD boards do you buy?
We purchase genuine Hitachi 2.5-inch IDE (PATA) HDD controller boards removed from legacy Travelstar laptop hard drives. We also buy many other HDD PCBs, including SATA boards from Western Digital, Seagate, Toshiba, Samsung, Fujitsu, and additional manufacturers.
3. What's the difference between SATA and Non-SATA HDD controller boards?
Non-SATA HDD boards use the older IDE (PATA) interface with a 44-pin connector on laptop drives, while SATA boards use separate 7-pin data and 15-pin power connectors. They use different communication standards and are classified separately for recycling.
4. How can I identify a Hitachi IDE (PATA) HDD board?
Most Hitachi Travelstar IDE boards feature a compact 2.5-inch PCB, a 44-pin IDE connector, and a legacy parallel ATA interface. The board layout and controller ICs also differ from newer SATA models.
5. Do you buy damaged HDD controller boards?
Yes. We buy many damaged boards; however, boards with missing ICs, severe corrosion, broken PCBs, drilled holes, fire damage, or excessive contamination may receive lower prices or may not qualify.
6. Which Hitachi HDD models do you commonly accept?
We commonly purchase controller boards removed from legacy Hitachi Travelstar notebook hard drives and many other compatible IDE (PATA) models produced during the early 2000s.
7. Why does Ohata inspect every HDD board individually?
Every HDD PCB is visually inspected before pricing. We evaluate the interface type, manufacturer, controller IC, board completeness, physical condition, recoverable materials, and overall quality to ensure a consistent purchasing process.
8. Can I sell the controller board without the hard drive?
Yes. We purchase standalone HDD PCBs. However, complete boards with original electronic components generally receive better purchasing values than stripped or incomplete boards.
9. How does Ohata classify HDD boards?
We use the Ohata HDD Board Classification, an internal identification and purchasing reference developed from practical recycling experience and technical research. It helps distinguish SATA and Non-SATA HDD controller boards but is not an industry-wide standard.
10. Why can buying prices vary?
Electronic scrap prices fluctuate due to market demand, material recovery values, board condition, and component completeness. Because each HDD PCB is different, every board is evaluated individually.
11. Does the buying price shown on this page include taxes?
Yes. The buying price displayed at the top of this page is tax included, where applicable. Final payment is determined after inspection and depends on the material condition, completeness, quantity, classification, and current electronic scrap market conditions. Buying prices and purchasing policies may change without prior notice.
12. Where is Ohata Resource Canada Inc.'s recycling facility located?
Our primary Canadian recycling and purchasing facility is located in Richmond, British Columbia, where we inspect, purchase, and process electronic scrap materials. We proudly serve customers throughout Metro Vancouver, the Lower Mainland, and communities across British Columbia. Walk-in customers are welcome during regular business hours, and no appointment is required for most electronic scrap drop-offs.
13. Which areas do you serve in Metro Vancouver?
We proudly serve customers throughout Richmond, Vancouver, Burnaby, Surrey, Delta, New Westminster, Coquitlam, North Vancouver, West Vancouver, Langley, Maple Ridge, and the surrounding Metro Vancouver region. Businesses and individuals from across British Columbia are also welcome to sell electronic scrap to Ohata Resource Canada Inc.
14. What is Ohata Resource Canada Inc.?
Ohata Resource Canada Inc. is a Green-Tech E-Commerce company specializing in electronic scrap purchasing, IT asset recovery, and sustainable electronics recycling. Through Ohata.ai, we combine AI-assisted technology, technical board identification, and responsible resource recovery to help individuals and businesses recycle electronic materials efficiently and responsibly.
15. How does Ohata.ai help identify electronic boards?
Ohata.ai provides AI-assisted identification tools, technical buying guides, board classification resources, and reference images to help customers identify electronic boards before selling them. Our online platform makes it easier to understand current buying standards and prepare electronic scrap for recycling. Final classification and purchasing decisions are confirmed by our experienced team after physical inspection.
16. What payment methods do you offer?
After your electronic scrap has been inspected and approved, payment can be made using Interac e-Transfer or direct deposit (EFT). Interac e-Transfers are typically issued within 24 hours after our Richmond team completes the inspection, while EFT payments are generally initiated within 1 to 2 business days, depending on your financial institution. Ohata Resource Canada Inc. does not charge transaction or processing fees for these payment methods.
17. Do I need to provide identification when selling?
Yes. Sellers are required to present a valid government-issued photo ID when selling electronic scrap materials. Acceptable identification may include a driver's licence, passport, or other government-issued photo identification. Business sellers may also be asked to provide company information where applicable. These requirements help us comply with applicable regulations and maintain responsible purchasing practices.
18. Is Ohata Resource Canada Inc. operated in accordance with WorkSafeBC safety requirements?
Yes. Our Richmond facility follows WorkSafeBC safety requirements for electronic scrap receiving, material handling, sorting, and processing. We are committed to maintaining a safe workplace while providing responsible electronics recycling services for both residential and commercial customers.
Browse all Hard Disk Drive(HDD) Non-SATA Board items
AI Scrap Grading Ohata.AI Vision 1.0 Beta 1.0 Upload board photos for grade and reference price