What does “With Board” mean?

“With Board” means the original controller board is still attached in its original mounting position as part of the hard drive assembly.

Does a loose HDD controller board count as “With Board”?

No. A loose controller board does not qualify the drive as With Board. The controller board should remain installed as part of the original drive assembly.

Can a damaged controller board still qualify?

Possibly. The controller board may still remain part of the original assembly even if it has been affected by normal punching, bending, or drilling during data destruction.

Does the hard drive need to operate?

No. Working condition is not required. The purchasing category is primarily determined by the controller-board installation status and the identifiable condition of the driv

Should drives with and without controller boards be sorted separately?

Yes. Separating With Board, No Board, loose controller boards, and other HDD components helps simplify inspection and supports accurate purchasing category identification.

Can severely damaged drives still be inspected?

Possibly. Hard drives showing typical data-destruction damage may still be inspected. Fire damage, heavy corrosion, chemical contamination, or missing major assemblies may require additional evaluation.

How does Ohata confirm this purchasing category?

Ohata generally confirms the purchasing category by reviewing the controller-board installation, original assembly configuration, physical condition, and the identifiable features of the drive before completing the purchasing evaluation.

Home
/
Scrap price
/
Hard Disk Drive scrap
/
Hard Drive Punched or Bent With Board buying

Hard Drive Punched or Bent With Board buying scrap price

Back to Hard Disk Drive price list

Key Buying Introduction

1. This category applies to hard disk drives that have been physically damaged but still retain the original controller board. The drive may be punched, bent, drilled, crushed, or otherwise mechanically damaged.

2. The original HDD controller board must remain attached in its original mounting position. Even if the drive no longer works, the attached controller board is one of the main features used to identify this purchasing category.

3. Customers generally do not need to remove the controller board before bringing the damaged hard drive to Ohata. The drive should be presented in its current assembled condition for purchasing evaluation.

4. Whenever practical, damaged hard drives with the controller board attached should be sorted separately from damaged hard drives without a board, loose HDD controller boards, complete hard drives, and other dismantled HDD components.

5. The final purchasing evaluation is generally based on the presence of the original controller board, the degree of physical damage, overall completeness, quantity presented, and current electronic scrap market conditions. Purchasing prices and buying conditions may change without prior notice.

Updated: Aug 04,2026

Today's scrap price for this material

0.45 CAD / lb

The Price is buying by Yard of Richmond, BC, Canada.

Price history

Price history will appear here as updates are recorded.

Call Email

Key Buying Introduction

Buying Details of Conditions

Damaged Hard Drive With Original Controller Board

This purchasing category is intended for physically damaged hard drives where the original HDD controller board remains installed on the drive.

The presence of the original controller board is the primary characteristic used to distinguish this category from Hard Drive Punched or Bent No Board.

Keep the Controller Board Attached

The original HDD controller board should remain installed in its factory mounting position whenever practical.

Customers generally do not need to remove the controller board before bringing the drive to Ohata. Keeping the board attached helps inspectors identify the complete hard drive assembly during purchasing evaluation.

Common Types of Physical Damage

This category may include hard drives that show damage such as:

Punched housing
Bent cover
Drilled case
Crushed enclosure
Heavy dents
Deformed frame

Physical damage does not automatically prevent the drive from being evaluated if the original controller board remains attached.

Sort Different HDD Materials Separately

Whenever practical, damaged hard drives with the controller board attached should be sorted separately from:

Hard Drive Punched or Bent No Board
Loose HDD controller boards
Complete hard drives
HDD platters
HDD magnets
Aluminum HDD housings

Keeping different materials separate helps simplify inspection and supports accurate purchasing category identification.

Working Condition Is Not Required

This purchasing category is based on the physical assembly rather than whether the hard drive still operates.

A punched or bent hard drive may still qualify if the original controller board remains attached and the remaining assembly can be identified during inspection.

How Ohata Confirms This Category

During inspection, Ohata may review:

Original HDD controller board
Evidence of physical damage
Overall assembly completeness
Degree of dismantling
Mixed electronic materials
Quantity presented

The final purchasing category is confirmed according to the actual condition of the hard drive presented during inspection.

FAQ

1. What is today’s price for Hard Drive Punched or Bent With Board buying?: As of Aug 04,2026, Ohata Resource Canada Inc., (Richmond, BC, Canada) is purchasing Hard Drive Punched or Bent With Board buying at 0.45 (CAD/lb). We provide competitive scrap prices in Delta, Surrey, Richmond, and across the Greater Vancouver area.
2. Which hard drives belong in the With Board category?: This category includes physically damaged hard drives where the original HDD controller board remains installed on the drive at the time of inspection.
3. What does “With Board” mean?: “With Board” means the original controller board is still attached in its original mounting position as part of the hard drive assembly.
4. Should I remove the controller board before bringing the drive to Ohata?: No. Customers generally do not need to remove the controller board. The drive should be presented according to its actual assembled condition.
5. Does a loose HDD controller board count as “With Board”?: No. A loose controller board does not qualify the drive as With Board. The controller board should remain installed as part of the original drive assembly.
6. Can a damaged controller board still qualify?: Possibly. The controller board may still remain part of the original assembly even if it has been affected by normal punching, bending, or drilling during data destruction.
7. Does the hard drive need to operate?: No. Working condition is not required. The purchasing category is primarily determined by the controller-board installation status and the identifiable condition of the driv
8. Should drives with and without controller boards be sorted separately?: Yes. Separating With Board, No Board, loose controller boards, and other HDD components helps simplify inspection and supports accurate purchasing category identification.
9. Can severely damaged drives still be inspected?: Possibly. Hard drives showing typical data-destruction damage may still be inspected. Fire damage, heavy corrosion, chemical contamination, or missing major assemblies may require additional evaluation.
10. How does Ohata confirm this purchasing category?: Ohata generally confirms the purchasing category by reviewing the controller-board installation, original assembly configuration, physical condition, and the identifiable features of the drive before completing the purchasing evaluation.