What are HDD platters?

HDD platters are the circular storage disks inside a hard disk drive where digital data is recorded. They are recovered after the hard drive has been dismantled.

Do HDD platters need to remain inside the hard drive?

No. This purchasing category is intended for platters that have already been removed from the original hard drive.

Can aluminum and glass platters be mixed together?

Whenever practical, similar platter materials should be grouped together. Mixed lots may require additional inspection before the purchasing category is confirmed.

Should spindle hubs remain attached?

Not necessarily. Recovered platters may be presented either with or without the spindle hub, depending on how the hard drive was dismantled.

Should HDD platters be mixed with HDD magnets or controller boards?

No. Recovered HDD components should preferably be sorted by component type before inspection.

Can scratched platters still qualify?

Possibly. Normal dismantling marks or surface scratches do not automatically prevent purchasing evaluation.

Can broken glass platters still be presented?

Possibly. Broken glass platters may still be inspected, although additional handling or evaluation may be required depending on their condition.

Are SSD storage devices included in this category?

No. This category is intended only for hard disk drive (HDD) platters. Solid-state drives (SSDs) do not contain storage platters.

Should recovered platters be cleaned before bringing them to Ohata?

Cleaning is generally not required. Recovered platters should simply be presented according to their actual condition after dismantling.

How does Ohata identify HDD platters?

Ohata generally confirms this purchasing category by reviewing whether the recovered material consists of HDD storage platters, along with the overall material consistency, contamination level, quantity presented, and any mixed dismantled components before completing the purchasing evaluation.

Home
/
Scrap price
/
PC Parts scrap
/
Hard Disk Drive (HDD) Platters buying

Hard Disk Drive (HDD) Platters buying scrap price

Back to PC Parts price list

Key Buying Introduction

1. Recovered HDD platters are the circular data-storage disks removed from inside a hard disk drive (HDD). Once the hard drive has been dismantled, the platters become individual recyclable components rather than part of a complete hard drive.

2. This category applies to HDD platters that have already been removed from the original drive. These platters are commonly recovered during secure data destruction, hard drive dismantling, electronic recycling, and material recovery operations.

3. Customers generally do not need to keep the platters inside the original hard drive. Once removed, they can be presented separately for purchasing evaluation.

4. Whenever practical, recovered HDD platters should be sorted separately from HDD controller boards, magnets, spindle motors, aluminum housings, screws, and other dismantled hard-drive components. Proper sorting helps simplify inspection and supports accurate purchasing category identification.

5. The final purchasing evaluation is generally based on the material presented, overall condition, quantity, and current electronic scrap market conditions. Purchasing prices and buying conditions may change without prior notice.

Updated: Aug 04,2026

Today's scrap price for this material

0.21 CAD / lb

The Price is buying by Yard of Richmond, BC, Canada.

Price history

Price history will appear here as updates are recorded.

Call Email

Key Buying Introduction

3. Customers generally do not need to keep the platters inside the original hard drive. Once removed, they can be presented separately for purchasing evaluation.

Buying Details of Conditions

What is Hard Disk Drive (HDD) Platters?

This purchasing category is intended for HDD storage platters that have already been removed from the hard drive.

The platters should be presented as individual recovered storage disks rather than as complete hard drives.

Items that remain assembled inside a hard drive normally belong to a different purchasing category.

Separate Platters From Other HDD Components

Recovered platters should be sorted separately from other dismantled hard-drive materials, including:

HDD controller boards
Magnets
Spindle motors
Actuator assemblies
Aluminum housings
Top covers
Mixed electronic scrap

Sorting recovered materials by component type helps simplify inspection.

Keep Similar Platter Types Together

Whenever practical, group similar HDD platters together.

Examples may include:

Aluminum platters
Glass platters
Mixed platter lots

Grouping similar materials may help improve inspection efficiency.

Present Platters as Loose Recovered Components

HDD platters do not need to remain attached to the spindle hub or other drive assemblies.

Recovered platters may be presented as loose storage disks after dismantling.

However, platters permanently bonded to other materials or mixed with unrelated scrap may require additional inspection.

Avoid Mixing With General Metal Scrap

Recovered HDD platters should preferably be presented separately from:

Aluminum scrap
Stainless steel
Copper
Mixed non-ferrous metals
General electronic scrap

Keeping recovered platters separate helps preserve accurate purchasing category identification.

How Ohata Identifies HDD Platters

During inspection, Ohata may review:

Whether the material is an HDD storage platter
Overall platter condition
Material consistency
Mixed materials
Contamination
Quantity presented

The purchasing category is confirmed according to the actual recovered material presented for inspection.

Purchasing Evaluation

Recovered HDD platters are evaluated according to their identifiable material type, presentation condition, lot consistency, and current electronic scrap market conditions.

Purchasing prices and buying conditions may change without prior notice.

FAQ

1. What is today’s price for Hard Disk Drive (HDD) Platters buying?: As of Aug 04,2026, Ohata Resource Canada Inc., (Richmond, BC, Canada) is purchasing Hard Disk Drive (HDD) Platters buying at 0.21 (CAD/lb). We provide competitive scrap prices in Delta, Surrey, Richmond, and across the Greater Vancouver area.
2. What are HDD platters?: HDD platters are the circular storage disks inside a hard disk drive where digital data is recorded. They are recovered after the hard drive has been dismantled.
3. Do HDD platters need to remain inside the hard drive?: No. This purchasing category is intended for platters that have already been removed from the original hard drive.
4. Can aluminum and glass platters be mixed together?: Whenever practical, similar platter materials should be grouped together. Mixed lots may require additional inspection before the purchasing category is confirmed.
5. Should spindle hubs remain attached?: Not necessarily. Recovered platters may be presented either with or without the spindle hub, depending on how the hard drive was dismantled.
6. Should HDD platters be mixed with HDD magnets or controller boards?: No. Recovered HDD components should preferably be sorted by component type before inspection.
7. Can scratched platters still qualify?: Possibly. Normal dismantling marks or surface scratches do not automatically prevent purchasing evaluation.
8. Can broken glass platters still be presented?: Possibly. Broken glass platters may still be inspected, although additional handling or evaluation may be required depending on their condition.
9. Are SSD storage devices included in this category?: No. This category is intended only for hard disk drive (HDD) platters. Solid-state drives (SSDs) do not contain storage platters.
10. Should recovered platters be cleaned before bringing them to Ohata?: Cleaning is generally not required. Recovered platters should simply be presented according to their actual condition after dismantling.
11. How does Ohata identify HDD platters?: Ohata generally confirms this purchasing category by reviewing whether the recovered material consists of HDD storage platters, along with the overall material consistency, contamination level, quantity presented, and any mixed dismantled components before completing the purchasing evaluation.