Hard Drive Punched or Bent With Board buying scrap price

Learn more about Punched or Bent Hard Drives

Damaged Hard Drive With Original Controller Board

This purchasing category is intended for physically damaged hard drives where the original HDD controller board remains installed on the drive.

The presence of the original controller board is the primary characteristic used to distinguish this category from Hard Drive Punched or Bent No Board.

Keep the Controller Board Attached

The original HDD controller board should remain installed in its factory mounting position whenever practical.

Customers generally do not need to remove the controller board before bringing the drive to Ohata. Keeping the board attached helps inspectors identify the complete hard drive assembly during purchasing evaluation.

Common Types of Physical Damage

This category may include hard drives that show damage such as:

• Punched housing

• Bent cover

• Drilled case

• Crushed enclosure

• Heavy dents

• Deformed frame

Physical damage does not automatically prevent the drive from being evaluated if the original controller board remains attached.

Sort Different HDD Materials Separately

Whenever practical, damaged hard drives with the controller board attached should be sorted separately from:

• Hard Drive Punched or Bent No Board

• Loose HDD controller boards

• Complete hard drives

• HDD platters

• HDD magnets

• Aluminum HDD housings

Keeping different materials separate helps simplify inspection and supports accurate purchasing category identification.

Working Condition Is Not Required

This purchasing category is based on the physical assembly rather than whether the hard drive still operates.

A punched or bent hard drive may still qualify if the original controller board remains attached and the remaining assembly can be identified during inspection.

How Ohata Confirms This Category

During inspection, Ohata may review:

• Original HDD controller board

• Evidence of physical damage

• Overall assembly completeness

• Degree of dismantling

• Mixed electronic materials

• Quantity presented

The final purchasing category is confirmed according to the actual condition of the hard drive presented during inspection.

Ready to Sell Hard Drive Punched or Bent with Boards in Richmond?

Once you believe your processors match the item's characteristics, you don’t need to confirm the final grade yourself. The next step is simply to check the current buying information, keep the processors intact and prepare them for inspection.

STEP 1 – Check Today’s Buying Prices and Sort Your Materials

Before visiting our Richmond yard, please review the latest Canadian e-scrap buying prices and identification guides in the Ohata Scrap Wiki.

You can also use Ohata.AI Vision 1.0 Beta 1.0 to investigate an unfamiliar circuit board. Upload a clear photograph, and the tool can analyze visible features, such as the board’s shape, CPU socket, integrated circuits, connectors and component layout, to suggest what type of board it may be.

Buying prices and conditions may change with the market, so checking the applicable item page before you leave can help you understand how your material should be prepared.

Whenever practical, separate your e-scrap into groups such as:

• Computer motherboards

• Hard drives and HDD controller boards

• Server boards

• Laptop motherboards and logic boards

• Telecommunications boards

• CPUs and memory modules

• Power supplies and cables

• Other or uncertain electronic scrap

You don’t need to assign every item a final grade yourself. If something is unfamiliar, keep it in an “uncertain” group and use Ohata.AI for a preliminary photo-based identification.

Walk-ins are welcome during regular business hours, and no appointment is required for most ordinary drop-offs.

If you have a large commercial load, palletized shipment or an unusual type of material, please contact the Richmond team before visiting so we can prepare for your arrival.

STEP 2 – Bring Your E-Scrap and Valid Government-Issued Photo ID

Please bring your electronic scrap together with a valid government-issued photo ID.

Examples may include:

• British Columbia Driver’s Licence

• BC Identification Card

• BC Services Card with photo

• Canadian passport

• Permanent Resident Card

• Other valid government-issued photo identification

Business sellers may also be asked to provide company information or supporting documentation when applicable.

Clearly separated and labelled material is usually quicker to inspect. If possible, prepare the approximate weight and quantity for each group before visiting.

Please also remember that computers, servers, hard drives and solid-state drives may contain personal or business information. Back up anything you need and follow your own data-security requirements before the equipment leaves your control.

STEP 3 – Visit Our Richmond E-Scrap Buying Yard

Our Richmond yard is located at 11220 Voyageur Way, Unit 7, Richmond, BC, V6X 3E1. Before leaving, you can check the route and current traffic information through Google Maps.

1. Look for the Ohata sign

When you arrive at the property, first look for the Ohata Resource Canada Inc. sign on the building. Once you find it, continue around to the rear of the building, where our warehouse entrance is located.

When you see this sign, continue around to the rear of the building.

2. Continue to the Rear Warehouse Entrance

Drive carefully around the building and look for the vertical Ohata sign beside the rear entrance. This vertical sign is the easiest landmark for finding our receiving warehouse.

Follow the route around the building to reach the warehouse.

The vertical Ohata sign identifies the correct warehouse entrance.

3. Park Directly in Front of the Warehouse

If you arrive by car, you may park directly in front of the Ohata warehouse entrance while your e-scrap is being received.

Once you reach the warehouse, please park and wait there. A member of our team will come to assist you with your material.

If you have difficulty finding the rear entrance, please call or message us:

Telephone and WhatsApp: +1 (236) 888-1086

For large commercial loads or palletized shipments, please contact the Richmond team before visiting so we can prepare for unloading.

When you arrive:

• Bring smaller quantities to the receiving area.

• Ask a staff member for assistance with heavy or larger loads.

• Our team will inspect, sort and weigh the material.

• The applicable buying category and condition will be confirmed.

• The final buying price will be determined after physical inspection.

• Payment will be processed according to the current purchasing policy.

Walk-in customers are welcome during regular business hours. Most visits don’t require an appointment, but advance contact is recommended for commercial, palletized or unusually large loads.

You can review directions, parking and visitor information on the Richmond yard access page.

Helpful Tips Before Your Richmond Visit

• Check the current Canadian buying prices before travelling.

• Use Ohata.AI when you need help identifying an unfamiliar item.

• Take clear front-and-back photographs before requesting an initial review.

• Separate different board and equipment categories whenever practical.

• Keep damaged, wet, burned, corroded or contaminated items separate.

• Remove unrelated garbage and unnecessary packaging.

• Don’t cut boards or remove major components unless you understand how the separated materials will be evaluated.

• Back up and erase data-bearing devices according to your requirements.

• Bring valid government-issued photo identification.

• Contact Ohata Resource Canada Inc. before bringing a large commercial or palletized load.

Published online prices are references and may change. Final acceptance, classification, measured weight and buying price are determined after physical inspection.