Fujitsu 3.5-inch Desktop Hard Disk Drive (HDD) Non-SATA Board 1999 Buying
18.00 USD / lb
Fujitsu 3.5-inch Desktop Hard Disk Drive (HDD) Non-SATA Board (1999)
1.We buy minimum from 1 lb of Hard Disk Drive (HDD) Non-SATA Board.
2.Complete original 3.5-inch Fujitsu IDE/PATA (Non-SATA) HDD PCB with all major ICs and ROM chip intact.
3.PCB must be unbroken, free from severe corrosion, excessive oxidation, or fire damage.
4.No stripped components; gold-plated connectors and controller chips should remain attached.
Fujitsu 3.5-inch Desktop Hard Disk Drive (HDD) Non-SATA Board (1999)
1.We buy minimum from 1 lb of Hard Disk Drive (HDD) Non-SATA Board.
2.Complete original 3.5-inch Fujitsu IDE/PATA (Non-SATA) HDD PCB with all major ICs and ROM chip intact.
3.PCB must be unbroken, free from severe corrosion, excessive oxidation, or fire damage.
4.No stripped components; gold-plated connectors and controller chips should remain attached.
Fujitsu Desktop HDD Non-SATA Board Buying Details Condition
According to the current Ohata Circuit Board Scrap Classification, Desktop HDD Non-SATA controller boards are classified as S Grade due to their high IC density, quality capacitors, gold edge connectors, and legacy construction.
Buying Information
We Buy minimum From 1 Lb
Item Accepted: Fujitsu Desktop HDD Non-SATA Board (3.5-inch IDE/PATA HDD controller board)
Classification: S Grade (Ohata Circuit Board Classification)
Service Area: Seattle Metro Area, including Bellevue,Redmond,Kirkland,Renton,Kent,Auburn,Tukwila,Burien,Shoreline,Edmond,Lynnwood,Everett,Mountlake Terrace
Appointment Required: No. Walk-ins are welcome during business hours.
Identification: A valid government-issued photo ID is required for all electronic scrap transactions.
Board Condition: Boards should be reasonably complete and free from excessive contamination such as heavy corrosion, oil, dirt, or burned sections.
Quantity: Large quantities are accepted, subject to inspection.
Sorting: Pre-sorted material may help speed up the evaluation process.
Buying prices may be reduced if the boards exhibit any of the following:
Missing integrated circuits (ICs) or removed components
Broken, cracked, or heavily damaged PCB
Burned or heat-damaged electronic components
Excessive rust, corrosion, dirt, oil, or moisture contamination
Mixed with lower-grade electronic boards
Large non-electronic attachments that have not been removed
Excessive solder repairs or signs of stripped precious-metal-bearing components
Boards that cannot be positively identified as Fujitsu Desktop HDD Non-SATA boards during inspection
All buying prices are subject to change without prior notice based on market conditions.
Buying policies, grading standards, and purchasing conditions may be changed, updated, or discontinued at any time without notice.
Final grading, acceptance, and payment are determined after physical inspection by the buyer.