What is a Seagate HDD SATA Board 3.5-inch 2007?

A Seagate HDD SATA Board 3.5-inch 2007 is the controller PCB installed on many Seagate Barracuda and Barracuda NS desktop hard disk drives manufactured around 2007. It manages communication between the hard drive and the computer through the SATA interface and contains the controller IC, motor driver IC, and other electronic components.

How can I identify a Seagate 3.5-inch SATA HDD controller board?

Typical identification features include a 3.5-inch desktop PCB, a 7-pin SATA data connector, a 15-pin SATA power connector, an LSI Logic controller IC, a motor driver IC, and the original Seagate factory PCB layout. Some boards also include PCB numbers such as 100406533 REV A.

What grade is a Seagate SATA HDD board under the Ohata Board Classification?

According to the Ohata Board Classification, Seagate 3.5-inch SATA HDD controller boards are generally classified as HDD SATA Boards (A+ Grade) because of their multilayer PCB construction, integrated circuits, and recoverable electronic materials.

What condition receives the highest buying value?

Complete factory boards that retain the original controller IC, motor driver IC, ROM chip (where applicable), SATA connectors, and other major components generally receive the highest purchasing value. Missing parts, severe corrosion, or physical damage may reduce the buying price.

What types of damaged HDD boards may receive a lower purchasing value?

Boards with cracked PCBs, severe corrosion, burn damage, missing integrated circuits, damaged SATA connectors, drilled holes, heavy contamination, or extensive component removal may receive a reduced buying value or may not qualify for purchase after inspection.

Do you purchase Seagate SATA HDD boards in Seattle?

Yes. Ohata Shoji America Inc. purchases Seagate SATA HDD boards at our Seattle, Washington operation. We welcome both individual sellers and commercial customers, including computer recyclers, IT departments, electronics repair shops, and IT asset disposition (ITAD) companies.

Can I sell mixed electronic boards together?

Yes. We accept mixed loads containing SATA HDD boards, IDE (PATA) HDD boards, SSD PCBs, server drive boards, computer motherboards, networking equipment, and other electronic circuit boards. Additional sorting requirements may affect the final purchasing value.

Do you purchase Seagate SATA HDD boards in Seattle?

Yes. Ohata Shoji America Inc. purchases Seagate SATA HDD boards at our Seattle, Washington operation. We welcome both individual sellers and commercial customers, including computer recyclers, IT departments, electronics repair shops, and IT asset disposition (ITAD) companies.

What is the minimum quantity required to sell HDD controller boards?

Our minimum purchasing quantity is 1 lb for electronic scrap materials. Larger quantities may qualify for competitive volume pricing depending on the material type and current market conditions.

How is the final buying price determined?

Every shipment is inspected individually. Pricing is based on board completeness, recoverable materials, component condition, quantity, manufacturer, and current electronic scrap market conditions. AI-assisted identification may support the evaluation process, but final pricing is determined after physical inspection.

What is Ohata Shoji America Inc.?

Ohata Shoji America Inc. is a Green-Tech E-Commerce company specializing in electronic scrap purchasing, IT asset recovery, and sustainable resource recycling. Through Ohata.ai, customers can access identification guides, buying information, and electronic recycling services while supporting responsible resource recovery.

Who can sell electronic scrap to Ohata Shoji America Inc.?

We work with individuals, businesses, computer repair shops, electronics recyclers, corporate IT departments, data centers, educational institutions, government organizations, and IT asset disposition (ITAD) providers throughout the United States.

How does Ohata.ai help identify electronic boards?

Ohata.ai provides AI-assisted identification resources, detailed board classification guides, reference photographs, and technical information to help users identify electronic circuit boards before selling them. Final classification and purchasing decisions are confirmed after inspection by our experienced team.

Why is recycling HDD controller boards important?

Hard drive controller boards contain copper, gold, aluminum, and other recoverable electronic materials. Responsible recycling helps reduce electronic waste, conserves natural resources, and supports a circular economy by returning valuable materials to the manufacturing supply chain.

Is the price shown on this page tax included?

Yes. The buying price displayed at the top of this page is tax included, where applicable. Final payment is confirmed after inspection and depends on material condition, completeness, quantity, and current market conditions.

Why should I choose Ohata Shoji America Inc.?

Ohata Shoji America Inc. combines more than 25 years of Japanese recycling expertise with modern AI-assisted digital commerce. We provide transparent buying information, technical board identification resources, responsible electronics recycling, and professional customer service to individuals and businesses throughout the United States.

Home
/
Scrap price
/
Hard Disk Drive(HDD) SATA Board scrap
/
Seagate HDD SATA Board 3.5 inch 2007 Buying

Seagate HDD SATA Board 3.5 inch 2007 Buying scrap price

Back to Hard Disk Drive(HDD) SATA Board price list

Key Buying Introduction

Introduction

Ohata Shoji America Inc. purchases genuine Seagate 3.5-inch SATA HDD controller boards removed from desktop hard disk drives. The minimum purchasing quantity is 1 lb.
Complete factory PCBs that retain the original LSI controller IC, motor driver IC, ROM chip where applicable, 7-pin SATA data connector, 15-pin SATA power connector, and other major components generally qualify for higher purchasing values.
Each HDD logic board is evaluated individually based on condition, completeness, component retention, recoverable materials, manufacturer, quantity, and current electronic scrap market conditions. Final pricing is confirmed after physical inspection.
Walk-in customers are welcome at our Seattle-area U.S. facility during regular business hours, and no appointment is required for most drop-offs. We serve individuals, repair shops, recyclers, IT departments, ITAD providers, and commercial sellers throughout Seattle, the Puget Sound region, Washington State, and the United States.

Updated: Aug 06,2026

Today's scrap price for this material

10.50 USD / lb

The Price is buying by Yard of Seattle, WA, United States.

Price history

Price history will appear here as updates are recorded.

Call Email

Key Buying Introduction

Introduction

Ohata Shoji America Inc. purchases genuine Seagate 3.5-inch SATA HDD controller boards removed from desktop hard disk drives. The minimum purchasing quantity is 1 lb.
Complete factory PCBs that retain the original LSI controller IC, motor driver IC, ROM chip where applicable, 7-pin SATA data connector, 15-pin SATA power connector, and other major components generally qualify for higher purchasing values.
Each HDD logic board is evaluated individually based on condition, completeness, component retention, recoverable materials, manufacturer, quantity, and current electronic scrap market conditions. Final pricing is confirmed after physical inspection.
Walk-in customers are welcome at our Seattle-area U.S. facility during regular business hours, and no appointment is required for most drop-offs. We serve individuals, repair shops, recyclers, IT departments, ITAD providers, and commercial sellers throughout Seattle, the Puget Sound region, Washington State, and the United States.

Buying Details of Conditions

Seagate HDD SATA Board 3.5-inch 2007's classification is HDD SATA Board.

Learn more about HDD SATA Boards

Seagate HDD SATA Board 3.5-inch 2007 Purchase Guidelines

1. Genuine Seagate HDD PCB Requirement

We purchase original Seagate 3.5-inch SATA HDD controller boards removed from desktop hard disk drives manufactured around 2007. Genuine factory controller boards are preferred. Counterfeit, aftermarket replacement, repaired, or modified PCBs may not qualify for purchase.

2. Minimum Selling Quantity

The minimum purchasing quantity is 1 lb. We buy from the public, computer repair shops, electronics recyclers, IT departments, dismantlers, and IT asset disposition (ITAD) companies. Competitive pricing may be available for larger volumes.

3. Identification Features

Typical boards include:

Seagate HDD SATA Board 3.5-inch 2007 features

Seagate desktop HDD PCB
3.5-inch form factor
SATA interface
7-pin data connector
15-pin power connector
LSI Logic controller
Motor driver IC

4. SATA HDD Boards

SATA HDD controller boards use the Serial ATA (SATA) interface introduced as the successor to IDE (PATA). They are recognized by their compact serial connectors and updated controller architecture. Because SATA and IDE boards differ in interface, PCB design, and recoverable materials, they are classified separately within the Ohata Board Classification.

If you are unsure which type you have, compare the connector before bringing your boards for recycling.

SATA board and non-SATA board comparison chart

Related Page:

SATA vs. Non-SATA HDD Board Comparison

5. Board Condition

Higher purchasing values are generally offered for complete boards that retain the controller IC, motor driver, ROM chip (when equipped), connectors, crystal oscillator, and other major factory-installed components. Missing parts or previous repair work may reduce the purchasing value.

Related Page:

Complete VS Incomplete Boards

6. Damaged Boards

Cracked PCBs, severe corrosion, burn damage, missing integrated circuits, damaged connectors, drilled holes, or heavy contamination may lower the purchasing value or result in rejection after inspection.

7. Mixed Loads

Mixed shipments containing SATA HDD boards, IDE HDD boards, SSD PCBs, server drive boards, or other electronic circuit boards are accepted. Additional sorting may affect the final purchasing price.

8. Inspection and Pricing

All boards are evaluated individually for completeness, condition, recoverable materials, and overall quality. Final pricing is based on our inspection standards together with current electronic scrap market conditions.

9. Walk-In Service

Walk-in customers are welcome during our regular business hours, and no appointment is required for most electronic scrap drop-offs. Ohata Shoji America Inc. proudly serves customers throughout Seattle, Bellevue, Redmond, Kirkland, Tacoma, Everett, Renton, Kent, Auburn, Federal Way, the Greater Seattle metropolitan area, and communities across Washington State.

10. Buying Policy

Buying prices, acceptance standards, and classification guidelines may change without prior notice. The latest information published by Ohata Resource Canada Inc. and Ohata.ai supersedes previous versions.

11. How to Visit Our Seattle Recycling Yard

Selling your electronic scrap at Ohata Shoji America Inc. is quick and easy. Most customers can complete the entire process in just a few simple steps.

STEP 1 – Check Today's Buying Prices and Sort Your Materials

Before visiting our Seattle location, please review the latest buying prices and board classification guides on Ohata.ai. Electronic scrap prices may change based on current market conditions, so we recommend checking the website before your visit.

To help speed up the inspection process, please separate your materials by category whenever possible, such as:

Computer motherboards
HDD controller boards
Server boards
Laptop logic boards
Telecommunications boards
Other electronic scrap

No appointment is required for normal walk-in quantities.

For large commercial loads or pallet shipments, we recommend contacting us in advance so our staff can prepare for your arrival.

STEP 2 – Bring Your Electronic Scrap and a Valid Government-Issued Photo ID

Please bring your recyclable electronic materials together with a valid government-issued photo ID.

Acceptable identification may include:

Washington State Driver License
State Identification Card
U.S. Passport
Permanent Resident Card
Other government-issued photo identification

Business sellers may also be asked to provide company information or documentation when applicable.

Having your materials reasonably organized helps us complete the inspection more efficiently.

STEP 3 – Visit Our Seattle Recycling Facility

📍 Ohata Shoji America Inc.
Unit B, 423 S Horton St, Seattle, WA, 98134, United States

When you arrive:

Bring your materials to our receiving counter, or ask a staff member for assistance with larger loads.
Our team will inspect and weigh your materials.
Final buying prices are confirmed after inspection.
Once the transaction is complete, payment will be processed according to our current purchasing policy.

Walk-in customers are welcome, and no appointment is necessary for most visits.

Helpful Tips Before Your Visit

Review the latest buying prices before traveling.
Separate different board grades whenever possible.
Remove non-electronic trash or unrelated materials.
Bring a valid photo ID.
For unusually large quantities, please contact us before visiting.

FAQ

1. What is today’s price for Seagate HDD SATA Board 3.5 inch 2007 Buying?: As of Aug 06,2026, Ohata Shoji America Inc., (Seattle, WA, United States) is purchasing Seagate HDD SATA Board 3.5 inch 2007 Buying at 10.50 (USD/lb). We provide competitive scrap prices in Seattle, Bellevue, Renton, Tukwila, Kent, SeaTac, Tacoma, Everett, and surrounding communities.
2. What is a Seagate HDD SATA Board 3.5-inch 2007?: A Seagate HDD SATA Board 3.5-inch 2007 is the controller PCB installed on many Seagate Barracuda and Barracuda NS desktop hard disk drives manufactured around 2007. It manages communication between the hard drive and the computer through the SATA interface and contains the controller IC, motor driver IC, and other electronic components.
3. How can I identify a Seagate 3.5-inch SATA HDD controller board?: Typical identification features include a 3.5-inch desktop PCB, a 7-pin SATA data connector, a 15-pin SATA power connector, an LSI Logic controller IC, a motor driver IC, and the original Seagate factory PCB layout. Some boards also include PCB numbers such as 100406533 REV A.
4. What grade is a Seagate SATA HDD board under the Ohata Board Classification?: According to the Ohata Board Classification, Seagate 3.5-inch SATA HDD controller boards are generally classified as HDD SATA Boards (A+ Grade) because of their multilayer PCB construction, integrated circuits, and recoverable electronic materials.
5. What condition receives the highest buying value?: Complete factory boards that retain the original controller IC, motor driver IC, ROM chip (where applicable), SATA connectors, and other major components generally receive the highest purchasing value. Missing parts, severe corrosion, or physical damage may reduce the buying price.
6. What types of damaged HDD boards may receive a lower purchasing value?: Boards with cracked PCBs, severe corrosion, burn damage, missing integrated circuits, damaged SATA connectors, drilled holes, heavy contamination, or extensive component removal may receive a reduced buying value or may not qualify for purchase after inspection.
7. Do you purchase Seagate SATA HDD boards in Seattle?: Yes. Ohata Shoji America Inc. purchases Seagate SATA HDD boards at our Seattle, Washington operation. We welcome both individual sellers and commercial customers, including computer recyclers, IT departments, electronics repair shops, and IT asset disposition (ITAD) companies.
8. Can I sell mixed electronic boards together?: Yes. We accept mixed loads containing SATA HDD boards, IDE (PATA) HDD boards, SSD PCBs, server drive boards, computer motherboards, networking equipment, and other electronic circuit boards. Additional sorting requirements may affect the final purchasing value.
9. What is the minimum quantity required to sell HDD controller boards?: Our minimum purchasing quantity is 1 lb for electronic scrap materials. Larger quantities may qualify for competitive volume pricing depending on the material type and current market conditions.
10. How is the final buying price determined?: Every shipment is inspected individually. Pricing is based on board completeness, recoverable materials, component condition, quantity, manufacturer, and current electronic scrap market conditions. AI-assisted identification may support the evaluation process, but final pricing is determined after physical inspection.
11. What is Ohata Shoji America Inc.?: Ohata Shoji America Inc. is a Green-Tech E-Commerce company specializing in electronic scrap purchasing, IT asset recovery, and sustainable resource recycling. Through Ohata.ai, customers can access identification guides, buying information, and electronic recycling services while supporting responsible resource recovery.
12. Who can sell electronic scrap to Ohata Shoji America Inc.?: We work with individuals, businesses, computer repair shops, electronics recyclers, corporate IT departments, data centers, educational institutions, government organizations, and IT asset disposition (ITAD) providers throughout the United States.
13. How does Ohata.ai help identify electronic boards?: Ohata.ai provides AI-assisted identification resources, detailed board classification guides, reference photographs, and technical information to help users identify electronic circuit boards before selling them. Final classification and purchasing decisions are confirmed after inspection by our experienced team.
14. Why is recycling HDD controller boards important?: Hard drive controller boards contain copper, gold, aluminum, and other recoverable electronic materials. Responsible recycling helps reduce electronic waste, conserves natural resources, and supports a circular economy by returning valuable materials to the manufacturing supply chain.
15. Is the price shown on this page tax included?: Yes. The buying price displayed at the top of this page is tax included, where applicable. Final payment is confirmed after inspection and depends on material condition, completeness, quantity, and current market conditions.
16. Why should I choose Ohata Shoji America Inc.?: Ohata Shoji America Inc. combines more than 25 years of Japanese recycling expertise with modern AI-assisted digital commerce. We provide transparent buying information, technical board identification resources, responsible electronics recycling, and professional customer service to individuals and businesses throughout the United States.

Seagate HDD SATA Board 3.5 inch 2007 Buying scrap price

Introduction

Price history

Introduction

Buying Details of Conditions

Seagate HDD SATA Board 3.5-inch 2007 Purchase Guidelines

1. Genuine Seagate HDD PCB Requirement

2. Minimum Selling Quantity

3. Identification Features

4. SATA HDD Boards

5. Board Condition

6. Damaged Boards

7. Mixed Loads

8. Inspection and Pricing

9. Walk-In Service

10. Buying Policy

11. How to Visit Our Seattle Recycling Yard

STEP 1 – Check Today's Buying Prices and Sort Your Materials

STEP 2 – Bring Your Electronic Scrap and a Valid Government-Issued Photo ID

STEP 3 – Visit Our Seattle Recycling Facility

Helpful Tips Before Your Visit

Related Items

HDD SATA Board Western Digital 2005 buying